FBF7000 series homogenizers for your production process

FBF7000 series homogenizers

High pressure homogenizing works as follows: The product reaches the homogenizing valve at low speed and high pressure. Passing through the valve constriction causes a violent acceleration followed by an immediate deceleration. This process step creates spheres that will implode when they encounter the collision ring. During the treatment, the liquid is also exposed to intense turbulence and high-frequency vibrations. These also have a positive effect on the micronization of the particles in the liquid.

Homogenizers may have a single or double stage homogenizing chamber. Double stage units are used for the treatment of specific fat products to prevent the re-aggregation of the fat globules after the first stage treatment.

Any questions?

Get advice from our experts

+31 (0) 85 48 35 801

FBF7000 series homogenizers

In order to permanently mix one or more substances in a liquid, it is necessary to use a homogenizer that allows micronization and dispersion of the suspended particles in the liquid. The homogenization process makes liquids very stable, for the next treatment or storage.

Capacity of 3200-11500 l/h at 100-300Bar

Abrasive fluids, 2 stage or ultra high pressure models available

Pump pistons coated with a special “Diamond Like Carbon” material

Compression block made of 1 block of special type of stainless steel with a 5-year warranty

100% tested set up before delivery (plug-n-play)

PRODUCT SHEET

CONTACT

FBF7000 series homogenizers

Downloads

FBF homogenisator 7045-7090 HYPROSYS

CERTIFICATES AND STANDARDS

EU:

2006/42/EC – Machinery Directives
1935/2004 – Contact food guidelines
2023/06 – Good Manufacturing Practices (GMP)
2014/30/EU – Electromagnetic Compatibility Guidelines

US:

3A (optional)

Specifications

	PRODUCT
Models	FBF7045, 55, 75 of 90
Engine power	45, 55, 75 or 90 kW
Number of pump pistons	3
Water consumption	+/- 90 – 120 l/u
Weight	+/- 2.410 – 2.550 kg
Dimensions (w x d x h)	+/- 150x210x150 cm
Working pressure	100 till 300 Bar (higher pressures optional)
Capacity (depending on working pressure)	+/- 5000 till 16000 l/u

Two stage homogenization valve

Digital pressure transducers

Electrical control: Fixed capacity: An internal electrical board; Variable Capacity: separate stainless steel cabinet for local installation

Aseptic version with “sterility barriers” traced with steam condensate

Pulsation dampers on inlet and/or inlet connections of the product (not available with 3A)

Automatic shut-off of the homogenization pressure if the inlet pressure falls below a safe level (by means of a pressure gauge with alarm contacts placed on the product inlet)

Automatic homogenization pressure regulator

The compression head is made from a single forged block of a specially selected type of stainless steel

The compression head is guaranteed for 5 years against manufacturing defects

The pump pistons are coated with a special “Diamond Like Carbon (DLC)” material

The interchangeable valve groups are available in different compositions of materials to suit the product to be processed

The homogenizer valves are designed with high stability. The moving parts are aligned (head impact) to improve durability and energy efficiency

The hydrodynamic design ensures vibration-free operation of the homogenizers

The homogenizers have a hygienic spring-loaded pressure relief valve, replaceable plug and seat.

The pump body is constructed of high quality cast iron designed to withstand heavy loads and minimize vibration

The crankshaft is machined from one piece, specially selected steel. It is heat treated several times and fully nitrided.

The crankshaft is supported by robust bronze roller bearings on the crankpins

Driveline has a double reduction stage: “V”-belts/pulleys, semi-automatic tensioning system and two worm gears in the pump housing (the slow gear is directly coupled to the crankshaft)

The high pressure lubrication system is cooled, actively filtered, has level monitoring and alarms for irregular oil pressure and oil temperature

Gear motor connection is 3 phase, 4 pole, AC

The frame is made of powder-coated tubular profiles, finished with removable stainless steel panels.

Homogenizers