Dynashear for your production process

dynashear

The Dynashear in-line, high-shear mixer mixes, dissolves, de-agglomerates, disperses and emulsifies a wide variety of liquids and ingredients. The Dynashear features a tandem head design that combines the benefits of both an axial and radial stage. This creates excellent shear and flow properties resulting in a droplet size reduction to only 2 – 3 microns and a very tight distribution.

The Dynashear is designed to provide maximum versatility. Whether you're looking for a stand-alone inline mixer, a mixer to improve the performance of your batch process or further product refinement, the Dynashear ensures consistent quality with accurate reproducibility.

Any questions?

Get advice from our experts

+31 (0) 85 48 35 801

Advantages

The combination of the two phases provides greater efficiency over inline dispersion pumps that include only axial or only radial technology. A single pass through the Dynashear is equivalent to multiple passes through these “conventional” inline mixers.

CIP cleanable

3A and the DS-215 both 3A and EHEDG certified (3A certificate – EHEDG)

Low maintenance design (no bushings, sleeves, shims or bearing supports)

Disassemble and reassemble for inspection and cleaning in less than five minutes

Capacities from 1 – 662 liters per minute

Sealing pressures up to 31 bar at 204°C (depending on model)

Available with single or double mechanical seals

Frequency controller recommended on all models

PRODUCT SHEET

CONTACT

dynashear

Downloads

Hyprosys Admix Datasheet Dynashear

Hyprosys Admix General Brochure

Hyprosys Admix industries

Specifications

Model	Axial Diameter (mm)	Axial Tip Speed (m/s)	Radial centerline (mm)	Radial Tip Speed (m/s)	Engine Size kW)	Engine Speed (rpm)	Typical flow Rate ranges l/h)
ds-215	31,75	11,5	54,1	19,35	1,5	6.900	8-83
ds-425	57,15	10,6	107,9	20,4	4	3.600	76-303
ds-575	92,96	17,6	146,05	27,4	15	3.600	76-606

The primary axial phase

The primary axial stage consists of an axial flow rotor fed into a stator with several small ports. This forces material out between the faces and through the ports. This mechanical and hydraulic action creates a massive shear action that "mixes" ingredients before entering the secondary phase. Particle and droplet size down to 5 – 7 microns is typical at this stage.

The secondary radial phase

The secondary radial stage consists of a radial rotor that discharges product through a slotted stator causing additional mechanical and hydraulic shear. The centrifugal force makes it possible to push mixtures away from the shaft and along the radius of the stator, expelling them at high speed through the edge of the slots. Stable emulsions with droplet sizes of 2 – 3 microns or less are typical at this stage.

Dynashear DS-215 laboratory mixer

The DS-215 is designed for product development, simulation and scale-up. Predictable, repeatable results from lab to full production! The DS-215 is both 3A and EHEDG certified, and can be delivered on a cart in combination with a frequency controller.

mixing equipment