No other rotor-stator mixer offers the optimal shear and pump speeds of the Rotostat. The multi-action high speed rotor, unique spinning stator and large bottom screw drastically reduce dispersion and total mixing time to less than 10 minutes for many applications. This combination of mixing heads results in lower power consumption and 100% product uniformity throughout the batch. The viscosity of the process can range from watery to over 50,000 cps without the need for auxiliary agitation.
Any questions?
Get advice from our experts
The rotor draws the mixture into the stator where it is subjected to a high shear action before being expelled at high speed through outlets in the stator rim. As it passes through these exits, the material is subjected to intense cutting and dispersion action for further particle size reduction. A completely lump-free, homogeneous mix is achieved within minutes. The Rotostat® gives your process:
Downloads
Specifications
Model | Max Batch size
(bile) | Standard
engine power
HP | Flow rate (lpm) | Mixing head dia. (mm) | Max. shaft length (mm) | Approx. weight (kg) |
---|---|---|---|---|---|---|
80XP63 | 60 | 15 | 1.552 | 130 | 813 | 34 |
80XP63 | 110 | 3 | 3.255 | 130 | 914 | 41 |
100XP81 | 250 | 5 | 4.391 | 165 | 1422 | 65 |
112XP94 | 400 | 7.5 | 6.511 | 196 | 1626 | 97 |
132XP124 | 600 | 7.5 | 8.706 | 259 | 1702 | 116 |
160XP148 | 1.000 | 10 | 13.211 | 320 | 2337 | 158 |
280XP175 | 1.500 | 20 | 19.268 | 363 | 2134 | 252 |
200XP200 | 2.500 | 15 | 22.750 | 419 | 2591 | 320 |
225XP225 | 3.500 | 25 | 29.943 | 472 | 2388 | 428 |
250XP250 | 5.000 | 30 | 44.251 | 526 | 2896 | 545 |
280XP300 | 7.500 | 40 | 53.223 | 630 | 3251 | 720 |
355XP300 | 10.000 | 50 | 72.453 | 630 | 3429 | 878 |
The single axis Rotostat design eliminates guide rods to hold the stator (less chance of fouling). The entire mixing head can be disassembled, separated and rinsed out, or cleaned in place in minutes.
Stainless steel motors are available up to 50 HP. In addition, a full line of frequency converters is available in stainless steel or washable lacquered housings.
Most models can be fitted with bearing frames made of 316 stainless steel. All bearings are sealed and the frame exit is double sealed
A detachable shaft coupling option makes inspection and maintenance of the rotor/stator head easy. This is especially useful when shaft lengths are long or when access to the mixing head is limited.
mixing equipment
Any questions?
Get in touch with the experts.
Callback request
We will call you back within 4 hours.
© 2003 - 2023 - Connecting Processes BV | Branded by BRANDBITS®